CLASSIC PRESERVATION OIL
Preservation Oil (Mineral Oil)
Til biler som står i stilstand i længere tid på f.eks. museer, samlinger eller biler som kun bruges sjældent og kun skal køre få km nå de endelig er i brug.
Performance Profile
Dual purpose preservation oil for storage and limited running of petrol or diesel engines. Highly refined mineral base oil with additional additive system to provide rust protection.
Application
Use to provide storage protection of mechanical parts. Primarily for engines, but can be used for transmissions. Suitable for vintage, classic, motor sport or industrial applications. Apply in the same way as a normal oil change ? Run engine to warm existing oil. Drain oil and change filter. Refill with Classic Preservation Oil and run for 10-15 minutes. Provides projected storage life of 3 years if oil is circulated every 6 months. Allows occasional use for up to 2000 miles, but this reduces storage life. When engine is required for service, run engine to warm oil and drain without changing oil filter. Refill with correct Millers Oil for continual use. Suitable for petrol and diesel engines.
User Benefits
- Vapour phase inhibitors provide anti-rust performance on working surfaces. Resistance to ?run-off? during lay-up.
- Can be used and run in gearboxes requiring an engine oil. Can be used for storage only in Hypoid final drives.
- Vehicles can be driven for up to 2000 gentle road miles.
- Utilises additive chemistry equivalent to API SJ/CC and incorporates additional performance to ensure significantly improved rust and corrosion protection.
Typical Characteristics
| SAE Viscosity |
20w50 |
| Specific Gravity (at 15°C) |
0.890 |
| Kinematic Viscosity (at 100°C, cSt) |
18.7 |
| Kinematic Viscosity (at 40°C, cSt) |
159 |
| Viscosity Index |
115 |
| Pour Point (°C) |
<-15 |
| Flash Point (°C) |
200 |
Heath & Safety
Health and Safety Data Sheet 5715 applies to this product. . If you require any further infomation about CLASSIC PRESERVATION OIL or its use please contact us.